MagFlux 7300

MagFlux 7300 sensor is manufactured with PTFE Liner and Wafer mounting.

The PTFE liner has a low degree of friction, and is chemicals resistant and suitable for high media temperatures.

  • Tick
    Supports IP 68 installations
  • Tick
    Small built-in lengths
  • Tick
    Sensor range, DN 15-100

The PTFE / PFA lining of MagFlux 7300 is working well also with the rugged elements of the waste water and as well for very corrosive chemicals.

 The output from the converter is RS485, and the converter can be wall mounted up to 1000m from the sensor, this is very common in larger waste water pumping facilities.
One MagFlux Display can handle 4 converters and sensors.

For very heated water, highly corrosive or water containing other aggressive elements the 7300 lining PTFE / PFA is recommended. This lining is especially created for process fluids.
The Electrodes is created in Steel, Hastelloy, titanium or platinum, will match almost any usage.

 

All MJK PRODUCTS ARE DELIVERED WITH A ONE YEAR FACTORY WARRANTY.
THE WARRANTY CAN BE EXTENDED BY UP TO FIVE YEARS.

The separate up to five years additional warranty contract must be ordered upon ordering of your MJK product.

MagFlux 7300 Sensor specifications

Mounting
Wafer
Material, Lining
PTFE / PFA
Accuracy
Better than ± 0,25 %
Materials, Housing
Carbon steel, optional stainless steel 304-316
Material, Electrodes
Steel 1,4571 / AISI 316 TI, optional Hastelloy, platinium, and titanium