7030 Level Control

In many places, the float switch provides a trustworthy back-up alarm or pump start.

MJK Float switch combines simplicity and durability.

The 7030 Float switch is made without mercury switches, making it an up-to-date, environment friendly unit.

Float switches are often used for pumping stations and sewage plants for controlling or alarms.

The 7030 Float switch is most commonly used in waste water pumping stations and sewage treatment plants.

The float switch is working via a built-in counterweight and a mercury free micro switch, providing additional environmental security.
The activation level of the 7030 Float switch is easily adapted by using a counterweight (accessories) on the cable. This allows the level switch to increase to a higher level before activating the switch and providing the float to be re-positioned.

In case of heavy sludge layer on top of the water in the well, the 7030 Float switch will work submerged with the counterweight.


7030 Float Switch is often used in waste water pumping wells for start and stop of the pumps and for low/high level alarms.

This waste water well is equipped with an Expert hydro-static level transmitter providing level measurement. Furthermore, the Float Switch provides high alarm indication in case of a blocked pump or severe amounts of incoming water.

 

All MJK PRODUCTS ARE DELIVERED WITH A ONE YEAR FACTORY WARRANTY.
THE WARRANTY CAN BE EXTENDED BY UP TO FIVE YEARS.

The separate up-to-five-years additional warranty contract must be ordered upon ordering your MJK product.

Specifications

Contact system
Mechanical
Output
Change-over contact
Max. load
AC: 250V / 16A, DC: 220V / 0,5A 24V / 16A
Housing
Polypropylene