nConnect

The first MJK control and monitoring unit was developed in 1979. In other words, MJK has spent more than 30 years developing new products for the Connect family. The latest Connect family member is nConnect, which is a pump controller specially developed for open land and stand-alone pumping stations.

nConnect has a built-in modem and can be used as a slave device for other pump controls. The unit can handle start/stop procedure for up to two pumps and offer an alarm signal at pump failure. nConnect is a smaller version of Mμ Connect, but with the same high quality. It is easy to configure and has very stable pump control without requiring a large amount of tools and accessories.

With the Connect series from MJK, you will achieve huge savings on your pump operation, fewer service hours and an easier workflow while protecting the environment. If you want to hear more about our products within control and monitoring, you are always very welcome to contact our qualified employees.

Contact MJK

Stable standard 2-pump control
BUDGET FRIENDLY

EASY SETUP WITH CONNECT LINK
STORMFLOW CALCULATION

CONTROL WORD FUNCTION
BACKWARDS COMPATIBLE

nConnect is a simple but intelligent 2-pump control, and is thus a perfect solution for open country or smaller decentralized pumping stations.

nConnect can also be used as an advanced slave device for Mµ Connect. The unit is delivered with a fixed number of inputs and outputs, and external communication takes place either via ModBus® or Comli.

nConnect is a simple pump control with logical functions. It is a perfect control for water wells and wells which - at the bottom line - will save you a lot of money.

nConnect can also be used as an advanced slave device for Mµ Connect. The unit comes with a fixed number of inputs and outputs, and external communication takes place either via ModBus® or Comli.

nConnect is a simple 2-pump control with logical functions. It is created for smaller and decentralized applications. The unit can - based on measurements in the tanks - among other things handle the operation of pumps controlling fish tank flows.

Based on input on oxygen content, level or temperature, you can program the logical functions of the device, allowing you to control not only pumps but also aerators.

nConnect is a simple 2-pump control with logical functions offering you a more flexible, economical and intelligent pump control.

nConnect can also be used as an advanced slave device for Mµ Connect. The unit comes with a fixed number of inputs and outputs, and the external communication takes place either via ModBus® or Comli.

SUITABLE FOR SMALLER PUMP STATIONS

nConnect is suitable for smaller pumping stations dimensioned for a single household on open land. Smaller standard pumping stations can easily communicate with a larger SCADA system, which then handles alarms and process incoming data.

By using nConnect as a slave device, you can control the network via MJK's Mμ Connect. Thus, it is a professional networking solution at an affordable price level.

LONG-TERM TEST OF PRODUCTS

Aa MJK, an important part of the development phase is extensive testing of our products. Among other things, we test products in our climate cabinet. Here, we can test devices long-term while they are exposed to the cold, the heat and humidity. That way, you can be sure to invest in control and monitoring products living up to your expectations.

nConnect

SUITABLE FOR SMALLER PUMP STATIONS

LONG-TERM TEST OF PRODUCTS

One-year warranty

FOR YOUR CONVIENCE ALL

MJK PRODUCTS HAVE

A 1 YEAR WARRANTY PERIOD.

Spcifications

Recommended Accessories

Accessories for Connect RTU Series