Expert 1400 Hydrostatic Level Transmitter

The ceramic capacitive sensor provides a stunning precision of +/- 0,1 %. The transmitter is just 22mm in diameter, and therefore often used in water borings, or on construction sites measuring the ground water levels to avoid possible damages on nearby buildings and the vast financial claims that may follow.

Expert 1400 is ATEX and UL approved for installations in explosion hazardous areas.

The transmitter is particularly popular in water borings and drinking water tanks but also used in process water when top precision is needed.

  • Tick
    Network
  • Tick
    Flexible Measuring Range
  • Tick
    Plug'n'Play
  • Tick
    Stainless Steel AISL316L
  • Tick
    Programmable zero point
  • Tick
    PUR Insulated cable

Expert 1400 is UL-ATEX (zone 1) approved for safe measurements even in explosive hazardous areas such as sewer systems and wells that are not well vented. The stainless steel body is equipped with a very precise ceramic capacitive sensor.
Factory made measuring ranges differ from 0-30cm to 0-300m, but the transmitter is re-programmable for individual adjusted measuring ranges.

The Danish produced Expert 1400 is very commonly used in water boring and drinking water basins and reservoirs. But also especially in ground water bore holes that need exact and stable monitoring.
Expert 1400 has a programmable zero point, but the entire measuring range can be adapted for individual specifications.
Exact measurements will only be affected by max +/- 0.1% per year; this is long lasting exact measurement for pivotal installations.
Output signal is provided in 4-20 mA and it has built-in surge protection.

Expert 1400 provides an extremely high accuracy of only +/- 0.1% and provide 4-20 mA signal via PUR insulated cable.
Exact measurements will only be affected by max +/- 0.1% per year; this is long lasting exact measurement for important installations.

Expert 1400 is UL-ATEX (zone 1) approved, providing safe measurements even in explosion hazardous areas, such as sewer system wells which are not well vented.
The stainless steel body is equipped with a very precise ceramic capacitive sensor.
Factory made measuring ranges differs from 0-30cm to 0-300m, but the transmitter is re-programmable for individual adjusted measuring ranges.

 

 

All MJK PRODUCTS ARE DELIVERED WITH A ONE YEAR FACTORY WARRANTY.
THE WARRANTY CAN BE EXTENDED BY UP TO FIVE YEARS.

The separate up-to-five-years additional warranty contract must be ordered upon ordering your MJK product.

Specifications

Measuring principle
Ceramic capacitive, relative pressure
Measurement accuracy
Better than ± 0.1 % FS @ +10 to 30 °C
Materials
Housing: Stainless steel (AISI 316 L), Diaphragm: 96,6 % Al2O3, Cell packing: Viton®
Cable
2 × 0,5 mm2 (pressure) + 5 x 0,15 mm2 (data), shielded, PUR insulation
Output signal
2-wire 4 - 20 mA (passiv transmitter)